FG BUY&SELL        FARMERS WEATHER       ARABLE FARMING        DAIRY FARMER      FARMERS GUARDIAN        AGRIMONEY        OUR EVENTS        MEMBERSHIP BENEFITS        BLOGS        MORE FROM US

You are viewing 1 of your 2 free articles

You’ll need to join us by becoming a member to gain more access.
Already a Member?

Login Join us now

Investment in establishment gets OSR off to a good start

Insights

Getting the best out of oilseed rape requires investment in establishment according to one Suffolk farming business. Geoff Ashcroft finds out more.

Twitter Facebook
Share This

Making the effort to get OSR off to a good start #OSR #arable

For many growers, oilseed rape establishment has become a crude, low-cost process, driven by the desire to trim costs to the bone.


There are those however, who remain committed to making the most of the crop, and it begins with getting it off to as good a start as possible, to make the most of yield potential.


Suffolk grower Robert Rush falls into the latter category, and has sidelined his Vaderstad Topdown and Biodrill establishment system for one which offers more accuracy with seed placement and the ability to sow into clean soil.

 

Effort

Effort

He says: “We have been getting away with it for the last few years, but the time has come to put some effort into getting the crop off to a much better start. Our 2015 rape yield was bordering on poor, though flea beetle has been a serious problem.”

 

Based at Hall Farm, Shimpling, near Bury St Edmunds, Mr Rush and his team handle an 1,800-hectare workload as Apollo Farms. The predominantly chalky boulder Hanslope series clay soils play host to a mix of combinable crops and sugar beet, with oilseed rape accounting for 350ha.

 

“We have been growing oilseed rape for about 30 years, with varying degrees of success,” he says. “And in that time, we have tried most systems with a view to keeping establishment a straightforward and low cost process.

 

“But this year’s rape yield varied enormously, from two-4.5 tonnes/ha, with an overall average of just 3t/ha. This is unsustainable in the long-term.

 

See also: Optimising OSR seed numbers for maximum yields

 

“We’ve been looking for ways to encourage more plant vigour, and this has led us on a path to more organic principles. Stronger plants should be better placed to withstand the winter and also fight pests and diseases.”

 

He also intends to widen the farm’s rotation, growing rape once every six years.

 

The route to a more consistent yield target of 4-4.5t/ha, he believes, should mostly come from putting more effort into seed placement, rather than broadcasting seed into a trash-filled mix and hoping for the best.

 

“We don’t remove straw, so there’s a huge volume of chopped and spread material to incorporate and I believe mixing trash into the top layer of soil does not help rape to get off to a good start,” he says. “There is too much competition.”

 

The route to higher yield has seen the business invest heavily in a He-Va nine-leg sub-soiler equipped with AccuDisc coulters on a frame. These double disc coulter units open a seed slot in the soil.

 

Each coulter assembly is spring-mounted on a parallelogram frame, enabling ground contours to be followed, while achieving a consistent seeding depth. Discs are followed by a rubber press wheel, which serves to close the slot and consolidate the surface.

 

Developed as a one-pass system, the sub-soiler also carries a slug pellet applicator and Nitrojet liquid fertiliser system. The latter affords nutrient placement, inline with the coulters, at the time of sowing.

 

A 1,600-litre liquid fertiliser tank sits on the tractor’s front linkage, with seed and slug pellet hoppers carried on an extended beam at the back of the implement.

 

“Where we had been broadcasting rape seed into a 6in mulch of soil, straw and trash, we are now placing seed into a much cleaner strip of soil with the help of low disturbance legs and disc coulters,” he says. “The legs seem to sweep trash to the sides, leaving a broken surface, which is firmed by the press roller ahead of the coulters.

 

“Adding liquid fertiliser and a dose of slug pellets too, all done in one pass, is the icing on the cake,” he says. “Once sown, the field is rolled.”

 

Without incorporation of trash, this latest establishment mechanism is one that could place higher demands on the combine’s chopping and spreading capability. And all eyes are on surface residues, which he sees being utilised by worms over the winter.

 

Mr Rush says the He-Va system has now saved a pass, and output at 40ha/day is broadly similar to his previous Topdown/Biodrill system.

 

“But we would always have to follow the Topdown with a press, and then often roll the field afterwards,” he says. “And where we needed to pull the 6m Topdown with our Quadtrac 550, we can handle the 5m He-Va with our Xerion 3800. So we’re saving on fuel too.”

Accuracy

Accuracy

Seed rates have been reduced too. The greater planting accuracy of disc coulters means the former 5kg/ha seed rate has been lowered to 3kg/ha, and sowing at wider 55cm row widths is also expected to encourage a greater number of pods.


“If this system proves to be successful, we’ll probably try 2.5kg/ha next year,” he adds. “There is an optimum seed density, and my target is to get 20-40 plants per square metre.


“Seed placement has been great, and the way the disc system operator means if there is a blockage – perhaps from being in wetter conditions – there is a way the seed can still get out. It won’t be planted with quite the same accuracy, but it won’t be missed.”


Greater accuracy though, comes at a cost. And the price of the He-Va machine has been considerably higher than any other oilseed rape establishment system previously used by Apollo Farms.


“It’s not a low-cost system. We’ve gone against the grain a bit with this one, and depreciation will be high,” he says. “But it’s a long-term purchase and the costs will be spread over a fair few acres over the next 10 years.”


Having carried out 15ha of supplementary contracting with the new machine, he anticipates a few more hectares for 2016, which should also help to offset its purchase price.


“There is always additional pressure to do the job properly on other people’s land,” he says. “But I’m confident of the machine’s ability to perform, and it will have more than one role in our machinery fleet.


“If we swap the low disturbance legs for proper sub-soiler legs, we can put the He-Va behind the Quadtrac and go sub-soiling.”


When it comes to running costs, he says the first set of points gave him a shock.


“Wearing metal costs were heading for £13/acre, so I hard-faced the second set of points in the workshop to try and reduce the running costs.”


He says there have been a few teething troubles with the machine too.


“But Opico and my local dealer TNS have both responded well to my concerns and to getting us going quickly,” he says. “There are some winter modifications to carry out, and I’m confident these will improve the machine’s durability.”


Having done his homework over the last couple of years and considered Mizuri, Stripkat and even home-built kit in the workshop, he remains steadfast with his buying decision.


“We can’t over-estimate the value of getting the crop off to a good start, and I see this as an essential part of achieving consistent yields,” he says. “Getting 5t/ha would be quite an achievement. It’s not impossible, but it is a long way off. We certainly couldn’t get it on this land using the Biodrill.”

 

Apollo Farm’s OSR establishment plan

    • Investment in a He-Va nine-leg sub-soiler equipped with AccuDisc coulters on a frame
    • Developed as a one-pass system with slug pellet applicator and Nitrojet liquid fertiliser system
    • Seed rates reduced from 5kg/ha to 3kg/ha
    • Sown at 55cm row widths
    • Establishment target is 20-40 plants/sq.m
Twitter Facebook
Rating (0 vote/s)
Post a Comment
To see comments and join in the conversation please log in.

More Insights

Where next for robotics?

Although research into automation of farming tasks is gathering pace, getting it into the field on a commercial scale remains a challenge.

SEASONAL GUIDE: Leaping into lambing

With lambing time on the horizon, Farmers Guardian have searched the archives for timely advice to ensure you a sound and successful season.

Low cost system ensures profitability

A Gloucestershire dairy farmer relies on a low-cost system which treats the herd as if it were one cow, in order to maintain a profitable business. Wendy Short reports.

Getting sand bedding right

Sand is only one option available for bedding dairy cubicles, posing its own challenges and benefits. Laura Bowyer visited Richard Chewter at a quarry in Hampshire.

Making better use of grass and improving fertility are keys to survival

Ireland’s dairy industry has made substantial improvement in on-farm performance and national output over the past 10 years. Ann Hardy reports from the Ireland Genetics UK Dairy Conference. 
FG Insight and FGInsight.com are trademarks of Briefing Media Ltd.
Farmers Guardian and FarmersGuardian.com are trademarks of Farmers Guardian Ltd, a subsidiary of Briefing Media Ltd.
All material published on FGInsight.com and FarmersGuardian.com is copyrighted © 2016 by Briefing Media Limited. All rights reserved.
RSS news feeds